BluCube^® loudspeakers feature the following:

·        Woven Kevlar^® Cones: Kevlar^® has physical properties that make it ideal for loudspeaker drivers and consequently is found in many of the world’s finest loudspeakers. Its combination of stiffness and strength-to-weight ratio means that it results in a more precise and defined sound reproduction.

·        Titanium tweeters: Another feature often found in the finest loudspeakers. The stiffness and lightness of a titanium dome tweeter results in cleaner, brighter audio definition.

·        Adjustable tweeters: The tweeters in your BluCube loudspeakers are mounted in an orbital socket and can be adjusted by gently pressing on their edge. This adjustment allows for directing the sound when the speaker may need to be offset from an ideal listening position due to aesthetic or physical reasons.

·        Stable tweeter housing: The tweeters in our circular flush-mount loudspeakers are mounted on a supremely stable bridge rather than on a central pole as found in many current designs. This allows the speaker to handle more power with increased cone stability resulting in lower harmonic distortion.

·        4/8 ohm impedance switching on the circuit board: The ability to switch between 4 ohms and 8 ohms impedance is useful to match the speakers to your amplifier and is also useful if you wish to set up multiple pairs of speakers connected to a single amplifier.

·        Attenuation Switches: Your BluCube loudspeakers (CXV-series and single-stereo speakers excepted) are fitted with high frequency (tweeter) and low frequency (woofer) attenuation switches (and midrange on CXC-800-3). These enable you to adjust the sound properties of the speaker to suit your personal listening preferences and the acoustic properties of the room in which you are installing them.

·        Cut-out template: BluCube loudspeakers come with a cut out template to allow the installer to accurately measure the hole to be cut out in the wall or ceiling surface resulting in an easier installation process.

·        Paint Mask: BluCube loudspeakers come with a paint mask to allow the installer to protect the surface of the tweeter and the woofer cone while (optionally) painting the surrounding speaker baffle.

·        Pre-construction bracket: All BluCube loudspeakers come with tough, plastic pre-construction brackets. Their use is optional, but can be very helpful to the installation process at the time the plasterboard is about to be attached to the wall/ceiling. Therefore they would be used only during more extensive renovations and not when fitting the loudspeakers into an existing surface.

·        Paintable Grilles: Your BluCube loudspeakers come with steel grilles pre-painted in white. These may be painted if required. Important: Please refer to the installation manual before embarking on this.

·        Grille removal tool: Your BluCube loudspeakers come with a pair of finger hooks to facilitate the removal of the grilles in the event that you wish to adjust or remove your loudspeakers.