B&W CM9 Floorstanding Loudspeakers (Pair)
B&W CM9 Floorstanding Loudspeakers (Pair)  Ref: BW-CM9
The three-way CM9 delivers truly commanding bass with the aid of twin 165mm paper/Kevlar® cone drive units. An FST® driver, with its characteristic compression surround supporting the outer edge of the distinctive Kevlar® cone, is specially developed for outstanding midrange performance. The CM9’s Nautilus™ tube-loaded aluminium dome tweeter keeps high frequencies crisp and sharp all the way up to 50kHz and beyond.

The quality of CM Series drive units has made it possible to use minimalist crossovers throughout the whole range. The resulting gentle transition between drivers avoids the unnaturally rapid changes in dispersion that bedevil more complex designs, while the high quality components, carefully chosen after exhaustive listening tests, ensure that as little as possible gets between you and the sound of the original recording.

All CM Series speakers come with aluminium driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speaker’s façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, or a highly polished gloss black.

Specifications

Woven Kevlar Yes
Crossover Tuning Yes
Nautilus Tapering Tube Yes
Flowport Yes
FST Yes
Technical features Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone FST midrange
Flowport™
Description 3-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar® cone FST midrange
2x ø165mm (6.5 in) paper/Kevlar® cone bass
Frequency range -6dB at 30Hz and 50kHz
Frequency response 56Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal:over 60º arc
Vertical:over 10º arc
Sensitivity 89dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
<1% 90Hz - 22kHz
<0.5% 120Hz - 20kHz
Nominal impedance 8 Ohm (minimum 3.0 Ohm)
Crossover frequencies 350Hz, 4kHz
Crossover Filters Bass unit 3rd order low pass
Midrange 2nd order high pass, 1st order low pass
Tweeter 1st order high pass
Recommended amplifier power 30W - 200W into 8 ohms on unclipped programme
Max. recommended cable impedance 0.1 Ohm
Height:990mm (39 in) 1025mm (40.4 in) with plinth
Width:200mm (7.9 in) cabinet only, 320mm (12.6 in) over plinth
Depth:321mm (12.8 in) (including grille and terminals), 370mm (14.6 in) over plinth
Net weight 26.6kg (58.5 lb)
Cabinet - Real Wood Veneers Grille
WengéBlack
RosenutBlack
Gloss BlackBlack